Description
Matt paint for walls with excellent washing resistance for interiors (class 1 resistance to wet cleaning (ISO 11998)). The product contains wax, which makes the painted surface resistant to liquids and dirt. Due to EasyCare's special hydrophobic coating, liquids such as soft drinks and juices that do get on the surface are not absorbed into the substrate but remain on the surface in the form of drops. The small contact area between the droplet and the substrate reduces the risk of contamination and greatly simplifies surface cleaning. EasyCare does not splash paint, it is easy to apply on the surface and evenly evenly, obtaining a smooth surface. The product is actually odorless, it can be tinted in a wide range of colors. The high abrasion resistance of the acrylic paint ensures a long-lasting, easy-care surface.
Application description
EasyCare paint is used for the surface finish. The product must be mixed thoroughly before use. Apply 2 coats of paint to the surface with a roller or brush, allowing the surface to dry according to the requirements for the interval between coats. The paint is ready to use, no dilution is required. Diluting the paint or applying it thinner than necessary may impair the hydrophobic and dirt-repellent properties of the surface. Large surfaces should be painted without interruption; breaks are only allowed in the corners. The consumption on the label must be taken into account when determining the required amount of paint. When applying a thinner layer of paint than necessary, the hydrophobic properties of the product may not be fully reflected. In the case of wall painting, the paint should be applied to the surface first transversely, then the surface should be leveled by moving the roller up and down. Each subsequent movement of the roller in the paint bar must be performed in the entire height of the wall in one direction. When painting the ceiling, work in the direction of light falling, ie leveling strokes should be made in the direction of the window. Under normal conditions, the paint acquires its initial water-repellent (hydrophobic) protection within 1-2 weeks after painting, so it is recommended to avoid intensive cleaning of the painted surface before the specified time has elapsed. If the painted surface needs to be cleaned faster, this should be done very carefully using a damp cloth. You can use lukewarm water and a soft microfiber cloth or a wash cloth to clean the dirty painted surface. Do not use abrasive tools or tools, a hard sponge or a hard brush.
Security alerts
Close the paint container firmly after work. Remove excess paint before cleaning tools. Do not empty into drains or the aquatic environment. Deliver paint residues to a hazardous waste collection point, deliver only completely empty containers for waste treatment.
