Description
Bosch Tronic 8000T Antibacterial glass-ceramic coating on the inside of the tank Each Bosch Tronic electric water heater is coated on the inside with a unique glass-ceramic developed in a Bosch laboratory. This glass-ceramic is a glassy substance tempered at a high temperature (780C - 850 ° C) and applied inside the tank. The main difference from glass is that this coating is resistant to changes in pressure and temperature. In addition, it is completely chemically neutral and provides complete hygiene in the hot water preparation process. Thus, there is no risk of the water "blooming" and there is no need to empty the tank when the hot water is not used.
Wide range of models from 35 to 120 liters The Bosch Tronic 8000T model range includes five water heaters with different volumes from 35 to 120 liters, which allows you to choose a water heater according to the location options in the house, summer house or apartment. In addition, high-volume water heaters can be used in gyms, restaurants, cafes, etc.
Horizontal and vertical position With the included mounting plate, depending on the installation location, the water heater can be installed both vertically and horizontally. The type of installation does not affect the operation of the electric water heater.
Precise temperature control thanks to electronic thermostat. The most accurate thermostat in the Bosch Tronic product line. This thermostat works with an accuracy of 1 - 3 ° C. This type of thermostat ensures maximum energy efficiency and energy savings of the hot water tank.
Convenient connection Standard 1/2 "connection points ensure easy connection of the hot water tank.
Warranty Thanks to the glass ceramic coating of the water heater, the warranty for the tank is 5 years. The warranty for electronics and other tank components is 2 years.
Fast water heating thanks to powerful tennis Depending on the model, the power output is from 1.2 to 2 kW. As a result, water heating from 15 to 65 ° C is from one and a half to three and a half hours, depending on the Bosch Tronic model and volume. All models are equipped with a thermometer that shows the current hot water temperature in the tank.
"Dry" tens In the Bosch Tronic 6000T and 8000T models, the electric tent is located in the flask and all water impurities settle on the flask and not on the tin itself. As a result, we get a longer service life because the electric tenant has no direct contact with water. As a result of damage to the ten, it can be replaced quickly, as there is no need to unscrew the tank flange and drain the water as you would with a regular ten.
Increased magnesium anode for additional corrosion protection Corrosion - one of the most common problems with hot water tanks. Therefore, all Bosch Tronic series electric heaters use enlarged magnesium anodes. The possibility of corrosion is affected by water quality and hot water tank maintenance. Service must be performed by an authorized service partner once a year.
Low heat loss due to unique 32mm thermal insulation Thanks to the unique thermal insulation of Bosch Tronic, the heat loss is 0.8 - 1.5 kW per day. If the temperature falls below the set level, the water heating process starts. The electric tent heats the water to a certain temperature and switches off with the help of a thermostat. In self-heating mode, a small amount of electricity is consumed. Thanks to this, the water is always heated to the required temperature.
"Antifreeze" mode The minimum recommended room temperature is 0 ° C. However, in order to avoid freezing of the water in the tank, it must be emptied during the winter or an anti-freeze mode must be installed. Antifreeze mode means setting a temperature of 10 ° C on the thermostat. Thus, the thermostat will maintain 10 ° C in the tank during the winter, while consuming a minimum amount of electricity.
The set includes: - Mounting plate: The universal mounting plate greatly simplifies the assembly process.
- Safety valve: Protects against overpressure in the tank that occurs during hot water heating. If the pressure rises above the permissible level (8 bar), the valve operates.
- Mounting stencil: The stencil makes the installation of the water heater much easier. It is enough to attach the stencil to the surface where the water heater will be mounted and drill holes as indicated in the stencil. This eliminates the possibility of incorrect calculations and drilling unnecessary holes in the wall.
- Mains cable: provides a quick connection to the mains.
- Electric water heater installation instructions in the national language. (it is also possible to download in pdf format on this page)
