FLEXBAL LIGHT PP POLYSTYROL 3 kg (TELURIA)

Description

Polystyrene glue Special glue for gluing polystyrene cover and heating plates. High quality product. The adhesive is intended for decorative cut and wall polystyrene coverings, the base of which is absorbent (plaster, aerated concrete, timber, etc.), dry and durable. The largest layers of old paint need to be scraped, absorbent and dusty substrates need to be impregnated with impregnating agents before gluing. After 4 hours of drying it can be glued. The glue is insoluble. Apply the adhesive to the substrate in the corners and in the middle in a layer 1-2 mm thick. The cover is then immediately pressed to the base and held for about 10 seconds. When gluing, the lowest substrate and outdoor temperature must be +15 ºC. Wash all accessories and soiled areas immediately with water. Observe the basic hygiene requirements. Protect from cold during transport and storage. Disposal of product residues. Unused glue residues can be disposed of in a household waste container when the water dries. Waste code - 080410, waste category - 0. Packaging disposal. Washed containers can be disposed of as secondary raw materials. Waste code - 150102, waste category - 0. Storage. Store in a dry place where the ambient temperature ranges from + 5 ºC to + 25 ºC. The product retains its functional properties in unopened original packaging at least until the date indicated on the packaging. Protect from the cold! Possible consumption - 0.170-0.230 kg / m2. Keep out of reach of children. If you feel unwell, seek medical advice immediately. EUH208 Contains BIT, CMIT, MIT. May produce an allergic reaction.