GLUE FOR GLASS FIBER WALLPAPER APEKO 5 kg (TELURIA)

Description

Teluria Apeko Sklotap V 1312

• For bonding fiberglass, vinyl, heavy textile wallpapers and rauhfaser wallpapers

Preparation of documents The paper surface must be free of loose particles, dust and grease. Old clay coatings must be scraped off. Plastering and cementing to remove cracks and inequalities. Provide metal surfaces with a suitable anti-corrosion coating.

Recommended workflow Apply the necessary adhesive layer to the dry surface and start bonding within two minutes. Wallpaper must be pre-cut to exact size and not soaked! Wallpapers stick from top to bottom. The adhesive is applied by brush, brush, roller or notched trowel. The wallpapers are pressed with a rubber roller from top to bottom and sideways. Remove extruded and loose excess adhesive immediately with a damp sponge. Do not apply the adhesive to the stock because the wallpaper will not stick perfectly to the semi-dry adhesive. The ambient and substrate temperature must not be less than 10 ° C.