Description
Dispersion adhesive for use in dry rooms. Suitable for gluing light paper and non-woven wallpaper on mineral surfaces and wooden surfaces, MDP, MPP and boards. The adhesive is characterized by excellent adhesion and strength.
SURFACE PREPARATION. The surfaces to be glued must be dry and clean. Paint, dust, dirt, greasy stains and other contaminants must be removed from the surface before gluing. It is recommended to prime the surface before gluing. Keep out of the reach of children. Avoid release to the environment.
SKIN CONTACT: Wash with plenty of soap and water.
EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice / attention.
Bonding. Stir well before use! Apply the glue by hand, using different types of brushes or rollers on the other side of the wallpaper, applying thoroughly to the edges. Allow the glue to soak in according to the wallpaper manufacturer's recommendations, or immediately press the wallpaper to the base (walls or ceiling). The open maturation time must not exceed 20 minutes. Remove all excess glue immediately. Adhesive consumption: 5.0-7.0 m2 / kg. The adhesive does not contain organic solvents, ready to use, any additives can completely change the adhesive properties of the adhesive. Do not glue if the ambient and wallpaper temperatures are below + 10 ° C. Used tools and containers can be washed with warm water to which detergent has been added. Store the adhesive in a tightly closed container at a temperature not lower than + 4 ° C. Protect from freezing!
