Description
Product description
Matt paint for walls with excellent washing resistance for interiors (class 1 resistance to wet cleaning (ISO 11998)). The product contains wax, which makes the painted surface resistant to liquids and dirt. Due to EasyCare's special hydrophobic coating, liquids such as soft drinks and juices that do get on the surface are not absorbed into the substrate but remain on the surface in the form of drops. The small contact area between the droplet and the substrate reduces the risk of contamination and greatly simplifies surface cleaning. EasyCare does not splash paint, it is easy to apply on the surface and evenly evenly, obtaining a smooth surface. The product is actually odorless, it can be tinted in a wide range of colors. The high abrasion resistance of the acrylic paint ensures a long-lasting, easy-care surface.
Product features - The paint is characterized by excellent washing resistance, the painted surface is easy to clean
- Forms a surface that is resistant to liquids and dirt
- Easy to apply on the surface and work
Application
The product is intended for painting walls and ceilings in dry rooms, where the painted surface must be resistant to washing. For example, in the living room and children's room, hallway, kitchen, hallway, office, as well as in public areas that need frequent
washing: at school, kindergarten, shop, hotel, restaurant, etc.
Painting suggestions During painting, the air and surface temperature must be: + 10… 25 ° C (recommended + 18 ± 2 ° C), relative humidity 40 ... 80% (recommended 65%). If the temperature is higher or lower than allowed and / or there is drafts during painting, a poor quality paint film may form.
The painted surface must be allowed to dry as required before the next coat is applied. Large surfaces should be painted without interruption; breaks are only allowed in the corners. The consumption on the label must be taken into account when determining the required amount of paint. When applying a thinner layer of paint than necessary, the hydrophobic properties of the product may not be fully reflected. In the case of wall painting, the paint should be applied to the surface first transversely, then
the surface should be leveled by moving the roller up and down. Each subsequent movement of the roller in the paint bar must be performed in the entire height of the wall in one direction. When painting the ceiling, work in the direction of light falling, ie leveling strokes should be made in the direction of the window.
Technical data:
Binder: acrylic
Resistance to wet cleaning ISO 11998 (28 days, 200 cycles) Class 1 (<2.4 µm)
Tinting: Acomix tinting system, complete choice of tones
Clean tools with water immediately after use
Storage: Store in a closed container in a dry and cool place (temperature should be above +5 ° C)
