Description
Product description: Chemical warning: H242 Heating may cause fire., H314 Causes severe skin burns and eye damage., P333 + P313 If skin inflammation or rash occurs: Get medical advice / attention., P311 Call a POISON CENTER or doctor / physician., H312 Harmful if Skin contact., H315 Causes skin irritation., H331 Toxic by inhalation., H335 May cause respiratory irritation., H411 Toxic to aquatic life with long lasting effects., P271 Use only outdoors or in a well-ventilated area., P101 If medical advice is needed, keep product packaging or labeling., H302 Harmful if swallowed., H317 May cause an allergic skin reaction., H319 Causes serious eye irritation., P102 Keep out of reach of children., P261 Avoid breathing dust / fume / gas / mist / vapors / spray. ., P280 Wear protective gloves / protective clothing / eye protection / face protection., P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue to wash eyes.
Description label: PTFE SEALANT. Removable anaerobic sealant for hydraulic fittings suitable for chemical products, gas, liquefied petroleum gas (LPG), methane, hydrocarbons, oils, naphtha, water, compressed air, etc. from -50 ° C to +150 ° C. Easy to dismantle. INSTRUCTIONS: Use on suitable metal threads that have been cleaned and thoroughly degreased. Apply a small amount of product to the first windings of the outer thread and the inner thread. Completely tighten the fittings. A weak screw can waste time. It is no longer recommended to open or adjust the connections after final tightening. Wait 24 hours for complete polymerization of the sealant before starting operation. In the case of mass assembly, it is recommended to use a pipe wrench to prevent the previous connection from moving to avoid film breakage during the formation phase. If the compound needs to be reconstituted after disassembly, remove the polymerized sealant using a metal brush and repeat the application. Warnings: Causes skin irritation and serious eye irritation. May produce an allergic skin reaction. May cause respiratory irritation. If medical advice is needed, have product container or label at hand. Keep the product out of the reach of children. Avoid breathing vapors. Use only outdoors or in a well-ventilated area. Wear protective gloves / protective clothing / eye protection / face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Contact a poison control center or doctor if you feel sick. If skin irritation or rash occurs: Get medical advice / attention. Keep closed. Contains: methacrylic acid, monoester with propane-1,2-diol, 2-hydroxyethyl methacrylate.
