Description
Gardena 6030 Classic Irrigation Computer
The Gardena Classic Irrigation Control System 6030 serves as an automatic control for larger irrigation systems, typically pop-up sprinkler irrigation systems such as the Gardena Sprinkler System. The Classic Irrigation Control System 6030 is ideally suited to situations where water is inadequate so that the entire system, which typically consists of multiple irrigation systems, operates simultaneously. Also with different irrigation requirements for plants located in different locations, the system regulates separate watering intervals for each channel, thus ensuring separate and optimal irrigation. The Classic Irrigation Control System 6030 is designed to connect up to six irrigation valves with 24 V (Art. No. 1278-20). For flexible irrigation programming, up to three programs can be stored per valve. Watering days and cycles can be selected separately, irrigation duration can be set from one minute to 3 hours and 59 minutes, and can be centrally adjusted from 0 to 200%. If irrigation has to be started immediately, it can also be activated manually. The large and easy-to-read display provides easy programming for the user. The Gardena pump control system (Art. No. 1273-20) can be connected to the main channel and can therefore be controlled and controlled as an alternative source of water. The Gardena Classic Irrigation Control System 6030 can be used indoors, such as in a garage, or in rain-protected areas, and has a 230V power connection. To ensure accurate and safe operation of the irrigation control system, a protection against power loss is provided by a 9 V alkaline battery (not included). You can connect a Gardena rain sensor or soil moisture sensor to save water.
An automatic irrigation system that saves time With the Gardena Classic Irrigation Control System 6030, your garden will be irrigated safely and comfortably, even when you are not at home. You'll get more free time, as well as a lush, green garden and beautiful, healthy plants.
Easy programming The large display makes programming easier. Step-by-step instructions are provided to the user in an easy and understandable way.
Different possibilities of using the irrigation system One valve or three independent watering programs. Watering days and cycles can be individually selected; watering duration can be flexibly set from one minute and 3 hours and 59 minutes.
Irrigation system with water saving mode With the addition of a Gardena rain or soil moisture sensor, automatic watering is interrupted depending on soil moisture and rain.
For use with different water sources The main channel can be used to connect the Gardena pump control system (Art. No. 1273-20) and to control and regulate up to 2000 W of alternative water sources, such as rainwater tanks. This saves water costs.
