Description
Bosch Tronic TR2000T
Antibacterial glass-ceramic coating on the inside of the tank Each Bosch Tronic electric water heater is coated on the inside with a unique glass-ceramic developed in a Bosch laboratory. This glass-ceramic is a glassy substance tempered at a high temperature (780C - 850 ° C) and applied inside the tank. The main difference from glass is that this coating is resistant to changes in pressure and temperature. In addition, it is completely chemically neutral and provides complete hygiene in the hot water preparation process. Thus, there is no risk of the water "blooming" and there is no need to empty the tank when the hot water is not used.
Wide range of models from 30 to 150 liters The Bosch Tronic 2000T-2 model range includes five water heaters with different volumes from 30 to 150 liters, which allows you to choose a water heater according to the location options in the house, summer house or apartment. In addition, high-volume water heaters can be used in gyms, restaurants, cafes, etc.
High resistance to system pressure changes The water heater tank at the factory has been tested at a pressure of 16bar, which is more than twice the pressure available in daily city water supply systems.
Convenient mechanical thermostat The temperature is regulated by a mechanical regulator located on the water heater tank housing. Thanks to this, installing a 70C water heater will independently maintain the required temperature in the tank.
Convenient connection Standard 1/2 "connection points ensure easy connection of the hot water tank.
Fast water heating thanks to powerful tennis Depending on the model, the power output is from 1.2 to 2 kW. As a result, water heating from 15 to 65 ° C is from one and a half to three and a half hours, depending on the Bosch Tronic model and volume. All models are equipped with a thermometer that shows the current hot water temperature in the tank.
Increased magnesium anode for additional corrosion protection Corrosion - one of the most common problems with hot water tanks. Therefore, all Bosch Tronic series electric heaters use enlarged magnesium anodes. The possibility of corrosion is affected by water quality and hot water tank maintenance. Service must be performed by an authorized service partner once a year.
"Antifreeze" mode The minimum recommended room temperature is 0 ° C. However, in order to avoid freezing of the water in the tank, it must be emptied during the winter or an anti-freeze mode must be installed. Antifreeze mode means setting a temperature of 10 ° C on the thermostat. Thus, the thermostat will maintain 10 ° C in the tank during the winter, while consuming a minimum amount of electricity.
The set includes: - Mounting plate: The universal mounting plate greatly simplifies the assembly process.
- Safety valve: Protects against overpressure in the tank that occurs during hot water heating. If the pressure rises above the permissible level (8 bar), the valve operates.
- Mounting stencil: The stencil makes the installation of the water heater much easier. It is enough to attach the stencil to the surface where the water heater will be mounted and drill holes as indicated in the stencil. This eliminates the possibility of incorrect calculations and drilling unnecessary holes in the wall.
- Mains cable: provides a quick connection to the mains.
- Electric water heater installation instructions in the national language. (it is also possible to download in pdf format on this page).
