Description
POLINIT - Acrylic paint for facades
Application: The paint is intended for protective and decorative building
POLINIT - Acrylic facade paint Application: For protection of building facades and decorative painting of facades and interior surfaces. It can be used to paint plastered (with cement and cement-lime plaster), putty, gypsum, plasterboard, concrete, aerated concrete, brick, stone, paper and glass fabric wallpaper surfaces, acrylic and mineral products. In addition, the paint is perfect for painting garden architectural elements, such as concrete fences, plinths, foundations. The paint is made using new materials and technologies and stands out with high mechanical properties. The rheological properties of the paint are good, the paint coating is flexible, binds well to the substrate, stands out with micro-ventilation, resistance to wet cleaning (class 2 according to LST EN 13300), weathering, UV rays.
Substrate preparation: Indoor surfaces: The surface to be painted must be clean, dry, free of dust, no cracks, well bonded to the substrate. Clean the adhesive paint and its residue, wash the surface with water. Degrease emulsion-painted surfaces, wash with water to which detergent has been added. Clean the old paint film that is poorly bonded to the substrate, level the surface. Prime newly plastered and highly water-absorbing surfaces (gypsum plaster surfaces, gypsum boards, never painted surfaces, etc.) with Dekoral brand primer AQUAGRUNT Koncentrat. Use Dekoral brand Podkładowa farba to even out the absorbency and color of the surface. Insulate stubborn dirt and greasy stains with Dekoral Renostyl Plus. Facades: The substrate must be firm, sufficiently hardened, free of cracks, degreased, clean, free of stains, biological or chemical contamination (salt or corrosion). Prime newly plastered and highly absorbent surfaces with Dekoral brand primer Aquagrunt Koncentrat.
Painting: Stir the paint well before use. Paint with a brush, roller or spray in 1-2 coats. It is recommended to use a roller: polyamide with a foamed underlay or sheep's wool, but for interiors - a polyamide (Magi) or microfiber roller, or a flat brush. If necessary (eg by painting the first layer), it can be diluted by adding up to 5% water (by volume). The next layer can be painted after the previous one has dried. During painting and drying, the ambient and substrate temperature must be between + 5 ° C and 30 ° C and the relative humidity must not exceed 70%. Do not paint outdoor surfaces if they are directly exposed to sunlight. Use appropriate covers.
Important: Newly plastered surfaces can be painted 4 weeks after the completion of plastering work. Wash the tools with water immediately after painting. During painting and drying, ventilate the room until a specific odor is obtained. Store and transport at +0 ÷ + 30 °, in original, airtight packaging. Protect from contamination. Drying time: 2 h. (At 20 ° C).
Consumption: Up to 12 m2 / l (for indoor walls) or up to 8 m2 / l (for facades), painted in one layer, depending on the smoothness and absorbency of the surface.
Hazardous ingredients: Contains a mixture of: 5-chloro-2-methyl-2H-isothiazol-3-one; 2-methyl-2H-isothiazol-3-one (3: 1) and 1,2-benzisothiazol-3 (2H) -one. May produce an allergy. A safety data sheet is available on request. Poison Control and Information Office phone: (8 5) 236 2052, mob. tel. 8 687 53 378. Product subcategory - 1.1.3./VDM (1.1.c according to Directive 2004/42 / EC). Limit value for volatile organic compounds (VOC) 40g / l (2010). The maximum amount of VOCs in the ready-to-use product is 30 g / l. It is recommended to use until the date indicated on the package.
Manufacturer:
PPG Deco Polska Sp.z oo, Kvidzynska 8, 51-416 Wroclaw, Poland.
