Description
Bosch Tronic 6000T Electric water heaters Bosch Tronic 6000 - Dry heating element (tens)
- Can be installed both vertically and horizontally
- High-density directly extruded polyurethane 32mm thick thermal insulation, which ensures minimal heat loss and economical operation of the equipment
- The glass-ceramic coating reliably protects against corrosion and ensures high water hygiene. The coating guarantees a long service life and continuous operation of the water heater
- Magnesium anode
- Flange for easy descaling of the water tank and easy access to the electric heating elements
- Safety valve
- Stainless steel hot water outlet
- 5-year warranty for the tank
Fast water heating thanks to powerful tennis Depending on the model, the power output is from 1.6 to 2.4 kW. As a result, water heating from 15 to 65 ° C is from one and a half to three and a half hours, depending on the Bosch Tronic model and volume. All models are equipped with a thermometer that shows the current hot water temperature in the tank.
"Dry" tens In the Bosch Tronic 6000T and 8000T models, the electric tent is located in the flask and all water impurities settle on the flask and not on the tin itself. As a result, we get a longer service life because the electric tenant has no direct contact with water. As a result of damage to the ten, it can be replaced quickly, as there is no need to unscrew the tank flange and drain the water as you would with a regular ten.
Capillary thermostat Much more accurate thermostat compared to standard, core thermostats. Designed as a tube containing a capsule with a special liquid that reacts to changes in water temperature. As the capsule heats up, the liquid in the capsule expands and pushes on the switch, as a result of which the water heating process is stopped. Compared to conventional core-type thermostats, a capillary thermostat is much more accurate. Its accuracy is +/- 3 ° C.
"Antifreeze" mode The minimum recommended room temperature is 0 ° C. However, in order to avoid freezing of the water in the tank, it must be emptied during the winter or an anti-freeze mode must be installed. Antifreeze mode means setting a temperature of 10 ° C on the thermostat. Thus, the thermostat will maintain 10 ° C in the tank during the winter, while consuming a minimum amount of electricity.
The set includes: - Mounting plate: The universal mounting plate greatly simplifies the assembly process.
- Safety valve: Protects against overpressure in the tank that occurs during hot water heating. If the pressure rises above the permissible level (8 bar), the valve operates.
- Mounting stencil: The stencil makes the installation of the water heater much easier. It is enough to attach the stencil to the surface where the water heater will be mounted and drill holes as indicated in the stencil. This eliminates the possibility of incorrect calculations and drilling unnecessary holes in the wall.
- Mains cable: provides a quick connection to the mains.
- Electric water heater installation instructions in the national language. (it is also possible to download in pdf format on this page)
